Researchers from Iowa State University are examining detailed processes in bioprinting, outlining their findings in the recently published ‘Printability of Hydrogel Composites Using Extrusion-Based 3D Printing and Post-Processing with Calcium Chloride.’ In this study, the authors analyze the further potential of gelatin-alginate hydrogels in 3D printing, combining post-processing with a calcium chloride solution to smooth part surfaces and increase gel strength.

While 3D printing and additive manufacturing processes are making significant impacts in a wide range of industries today, many expect this technology to open new doors for the manufacturing of pills and creating innovative forms of drug delivery systems. The benefits are undeniable, offering manufacturers the ability to continue promoting patient-specific treatment in the form of medications customized to each patient in terms of dose, structure, and more.

Alginate, a polysaccharide found in the cell walls of brown algae, has been highlighted in numerous studies related to 3D printing previously as researchers have combined the versatile material with cellulose nanocrystals, graphene oxide, and other alternative systems for fabrication. In demand because of its hydrophilic properties, alginate is also biocompatible, making it useful for researchers in bioprinting today. And while gelatin may not be as useful on its own in 3D printing applications, when combined with hydrogel composites, the two materials enhance one another in terms of viscosity, elasticity, and thermal qualities.

During the study, experimental hydrogels were created with three different ratios (1:4, 1:1 and 4:1 (w/w)) of gelatin and alginate powder.

“To determine the printability of material, two rheology tests were conducted. The flow ramp test was carried out to evaluate the apparent viscosity under an increasing shear rate ranging from 0.1 to 30.0 1/s. In order to characterize the dynamic modulus of a material, the oscillation frequency sweep test was conducted under a small strain of 0.1 with increased frequency from 0.1 to 1000 rad/s throughout the test,” explained the researchers.

  Optomec Study Examines Directed Energy Deposition vs. Powder Bed Fusion 3D Printing

Samples for the study were printed on a Velleman K8200 3D printer, after giving polymers a full day of hydration time. Each object consisted of 12 layers, printed with a syringe and nozzle diameter of 0.636mm.

“This shear-thinning behavior suggested that when there is shear stress during the 3D printing process, the material would flow easier with reduced viscosity,” explained the researchers. “This is probably due to the network of molecules were disrupted under shear stress. Due to this property, these materials are 3D printable through the extrusion-based printer once the stress higher than the yield stress is applied.”

The authors do not recommend the use of gelatin or alginate alone, however, as gelatin is too brittle, and alginate is too fluid to sustain a stable structure on its own.

The surface smoothness of the composites showed significant improvement upon immersion in the CaCl2 solution.

“Based on the rheological properties and the 3D printing results, we can conclude that the optimal ratio for the gelatin and alginate is 1:1. In addition, the post-processing treatment with different soaking time in calcium chloride solution indicated that longer soaking time would result in a stronger gel; however, further tests should be done to determine the effects of soaking time on gel strength,” concluded the researchers. “The most important finding of this study is that the gel strength and surface smoothness can be significantly improved by soaking the 3D printed geometries in the calcium chloride solution. The problem to address in the next step is to improve shape retention during the post-processing.”

  ORNL Collaboration Results in 3D Printed Target for Producing Important Medical Isotope

What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com.

[Source / Images: ‘Printability of Hydrogel Composites Using Extrusion-Based 3D Printing and Post-Processing with Calcium Chloride’]

If you're in need of 3D interior and exterior design services in the USA, our platform offers a comprehensive solution to bring your architectural projects to life. Through our service, you can request detailed 3D renderings that showcase both the interior and exterior of your property. Whether you're designing a home, office, or commercial space, our experts deliver photorealistic visualizations that highlight every element, from furniture arrangements to building facades, ensuring that your vision is accurately represented.

Through our website, you can easily access 3D interior and exterior design services tailored to your specific needs. With our help, you'll be able to create stunning visual representations of your designs, allowing you to present them to clients, investors, or stakeholders in a professional and engaging manner. Our team focuses on bringing out the best in your designs, ensuring that both the interior spaces and exterior elements are rendered with the highest level of detail and realism.

Leave a Reply