In the recently published ‘Incremental solidification (toward 3D-printing) of metal powders by transistor-based microwave applicator,’ authors Amir Shelef and Eli Jerby explore the potential of a new device for metal printing, using a compact scheme in a nitrogen-shielding environment.
While techniques such as selective laser-melting (SLM) and electron-beam melting (EBM) are popular for use in 3D metal printing, inert gases such as nitrogen and argon are used to prevent oxidation. Microwave energy is being used for heating of ceramic, as well as in post-processing for 3D printing, metal-powder sintering, joining, and casting and production processes too.
“The intentional localized-microwave-heating (LMH) instability, utilized in other processes such as microwave drilling and basalt melting, was also proposed and investigated for AM purposes,” stated the researchers. “It was found that LMH may heat up a small batch of metal powder by inducing eddy currents in it, till melting. The microwave irradiation is then stopped, and the batch is solidified (while cooling down) and consolidates with its substrate. In those pioneering studies, a ∼1-kW magnetron generator was employed in a waveguide structure.
“The feasibility of the LMH-AM technique is demonstrated by incremental constructions of simple elements, such as pillars, in the aspect of batch solidification and joining. On this basis, LMH-AM of more complicated structures in various orientations could be conceived.”
For this study, the authors tested their solid-state microwave application in an LMH-AM process, while also evaluating its true feasibility for other applications too.
The LMH-AM applicator is made up of a coaxial waveguide (with movable inner electrode) and a conductive electrode tip for ‘intensifying the LMH effect’ as it increases the electric field in the presence of powder. The solid-state microwave source is founded on a field-effect transistor (FET), of laterally diffused metal-oxide semiconductor (LDMOS), with an amplifier integrated into the RF-PowderTool™ system made up of an internal signal generator and power-amplifier module. Nitrogen serves as the shielding gas for preventing parasitic plasma effects, along with allowing the LMH-AM process to operate at lower microwave levels.
During experimentation for this study, the researchers placed powder manually, with the AM process performed in a series of steps, as follows:
- Ceramic bead was filled with the powder batch
- LMH was applied in a nitrogen environment
- A hotspot was created
- The batch was melted due to the thermal runaway
- Microwave power was turned off
- Ceramic bead was manually removed
- New powder batch was added on top of the previously solidified batch
“The LMH-AM operation at relatively low-power level (∼200 W) generated by a commercially-available solid-state amplifier was enabled here by the nitrogen environment, which eliminates the plasma produced in air-atmosphere,” concluded the researchers. “The effective microwave-energy density (absorbed in the powder batch) is therefore comparable to (and even higher than) the one demonstrated with previous magnetron-based experiments.
“In future, operating at higher microwave frequencies may further improve also the spatial resolution (due to the shorter wavelengths) hence the narrower hotspots would enable more delicate structures.”
Researchers around the world continue to experiment with better ways to use additive manufacturing processes, but especially with metal. This means studying the uses of a wide range of powders and alloys, solving issues like powder spreading, exploring new AM processes, improving management of materials, and more.
What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com.
[Source / Images: ‘Incremental solidification (toward 3D-printing) of metal powders by transistor-based microwave applicator’]
If you're in need of 3D interior and exterior design services in the USA, our platform offers a comprehensive solution to bring your architectural projects to life. Through our service, you can request detailed 3D renderings that showcase both the interior and exterior of your property. Whether you're designing a home, office, or commercial space, our experts deliver photorealistic visualizations that highlight every element, from furniture arrangements to building facades, ensuring that your vision is accurately represented.
Through our website, you can easily access 3D interior and exterior design services tailored to your specific needs. With our help, you'll be able to create stunning visual representations of your designs, allowing you to present them to clients, investors, or stakeholders in a professional and engaging manner. Our team focuses on bringing out the best in your designs, ensuring that both the interior spaces and exterior elements are rendered with the highest level of detail and realism.
